Difference: BlingBlingFunktionsweiseEn (1 vs. 7)

Revision 72016-03-31 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 21 to 21
 rLED = 0.23 m
CLED = 2 • π • rLED = 1.445 m
Changed:
<
<
tswitch = tmin ⁄ (CLED ⁄ rLED) = 269 μs
>
>
tswitch = tmin ⁄ (CLED ⁄ dtangential) = 269 μs
 

Revision 62016-03-30 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 46 to 46
 Creative Commons License
Velo Bling-Bling by Peter Schmid is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

META FILEATTACHMENT attachment="Strobe_2.gif" attr="" comment="" date="1459114230" name="Strobe_2.gif" path="Strobe_2.gif" size="9807" user="PeterSchmid" version="1"
Added:
>
>
META PREFERENCE name="WEBLOGOURL" title="WEBLOGOURL" type="Set" value="http://veloblingbling.ch/twiki/bin/view/Velo/EWheelEn"
META PREFERENCE name="WEBLOGOIMG" title="WEBLOGOIMG" type="Set" value="http://veloblingbling.ch/twiki/pub/Velo/EWheelEn/kmh-veloblingbling-thumb.png"
META PREFERENCE name="WEBLOGOALT" title="WEBLOGOALT" type="Set" value="Velo Bling-Bling home"

Revision 52016-03-30 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 7 to 7
  titlestyle="color:#F00000;" }%
Mode of Operation
Changed:
<
<
Thanks to the stroboscopic effect, the impression arises, that the image is motionless. The LEDs have to be turned on and off in time with the wheel rotation. One full wheel rotation takes about 750 ms at 10 km/h velocity, at 100 km/h it takes only 75 ms (supposed circumference is about 2.1 m for a 28" wheel). The radial distance between two LEDs is 2" (5.12 mm), the supposed tangential distance is the same for the same tangential and radial resolution. At maximum velocity the switch on period for a LED is 270 us. There have to be 96 LEDs (32 LEDs times 3 colors) switched in this period. That means there is only 3 us time for single LED.
>
>
Thanks to the stroboscopic effect, the impression arises, that the image is motionless. The LEDs have to be turned on and off in time with the wheel rotation. One full wheel rotation takes about 750 ms at 10 km/h velocity, at 100 km/h it takes only 75 ms (supposed circumference is about 2.1 m for a 28" wheel). The radial distance between two LEDs is 2" (5.12 mm), the supposed tangential distance is the same for the same tangential and radial resolution. At maximum velocity the switch on period for a LED is 270 μs. There have to be 96 LEDs (32 LEDs times 3 colors) switched in this period. That means there is only 3 μs time for single LED.
  circumference for 28" race wheel
C = 2.105 m

Revision 42016-03-28 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 7 to 7
  titlestyle="color:#F00000;" }%
Mode of Operation
Changed:
<
<
Dank dem Stroboskopeffekt entsteht für das Auge den Eindruck, als ob das Bild stehen würde. Die LEDs müssen dafür im richtigen Takt ein- und ausgeschaltet werden. Für ein Radumdrehung braucht es etwa 750 ms bei 10 km/h, bei 100 km/h sind das 75 ms (angenommener Radumfang bei einem Rennvelo ist 2.1 m). Der Abstand zwischen zwei LEDs beträgt 5.12 mm, im gleichen Abstand werden die LEDs geschaltet, das ergibt bei Maximalgeschwindigkeit eine Einschaltdauer der LED von 270 us (d.h. weniger als 0.3 Tausendstelsekunde). In dieser Zeit müssen die 16 LEDs auf der Vorderseite und die 16 LEDs auf der Rückseite geschaltet werden.
>
>
Thanks to the stroboscopic effect, the impression arises, that the image is motionless. The LEDs have to be turned on and off in time with the wheel rotation. One full wheel rotation takes about 750 ms at 10 km/h velocity, at 100 km/h it takes only 75 ms (supposed circumference is about 2.1 m for a 28" wheel). The radial distance between two LEDs is 2" (5.12 mm), the supposed tangential distance is the same for the same tangential and radial resolution. At maximum velocity the switch on period for a LED is 270 us. There have to be 96 LEDs (32 LEDs times 3 colors) switched in this period. That means there is only 3 us time for single LED.

circumference for 28" race wheel
C = 2.105 m

vmax = 100 km/h = 27.8 m/s
tmin = C ⁄ vmax = 75.8 ms

Tangential distance between 2 LEDs
dradial = dtangential = 5.12 mm

rLED = 0.23 m
CLED = 2 • π • rLED = 1.445 m

tswitch = tmin ⁄ (CLED ⁄ rLED) = 269 μs

 
Stroboscopic Effect
The stroboscopic effect is a visual phenomenon caused by aliasing that occurs when continuous motion is represented by a series of short or instantaneous samples. It occurs when the view of a moving object is represented by a series of short samples as distinct from a continuous view, and the moving object is in rotational or other cyclic motion at a rate close to the sampling rate. It also accounts for the "wagon-wheel effect", so-called because in video or film, spoked wheels on horse-drawn wagons sometimes appear to be turning backwards.

Revision 32016-03-28 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 6 to 6
  title="How does Velo Bling-Bling work?" titlestyle="color:#F00000;" }%
Changed:
<
<
>
>
Mode of Operation
 Dank dem Stroboskopeffekt entsteht für das Auge den Eindruck, als ob das Bild stehen würde. Die LEDs müssen dafür im richtigen Takt ein- und ausgeschaltet werden. Für ein Radumdrehung braucht es etwa 750 ms bei 10 km/h, bei 100 km/h sind das 75 ms (angenommener Radumfang bei einem Rennvelo ist 2.1 m). Der Abstand zwischen zwei LEDs beträgt 5.12 mm, im gleichen Abstand werden die LEDs geschaltet, das ergibt bei Maximalgeschwindigkeit eine Einschaltdauer der LED von 270 us (d.h. weniger als 0.3 Tausendstelsekunde). In dieser Zeit müssen die 16 LEDs auf der Vorderseite und die 16 LEDs auf der Rückseite geschaltet werden.
Changed:
<
<
>
>
Stroboscopic Effect
 The stroboscopic effect is a visual phenomenon caused by aliasing that occurs when continuous motion is represented by a series of short or instantaneous samples. It occurs when the view of a moving object is represented by a series of short samples as distinct from a continuous view, and the moving object is in rotational or other cyclic motion at a rate close to the sampling rate. It also accounts for the "wagon-wheel effect", so-called because in video or film, spoked wheels on horse-drawn wagons sometimes appear to be turning backwards.

Depending on the frequency of flash, the element appears motionless or rotating in reverse direction.

Line: 24 to 26
  -- Peter Schmid - 2014-11-04
Changed:
<
<

Comments

<--/commentPlugin-->
>
>
Creative Commons License
Velo Bling-Bling by Peter Schmid is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
 
META FILEATTACHMENT attachment="Strobe_2.gif" attr="" comment="" date="1459114230" name="Strobe_2.gif" path="Strobe_2.gif" size="9807" user="PeterSchmid" version="1"

Revision 22016-03-27 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner"
Line: 6 to 6
  title="How does Velo Bling-Bling work?" titlestyle="color:#F00000;" }%
Changed:
<
<
Dank dem Stroboskopeffekt ensteht für das Auge den Eindruck, als ob das Bild stehen würde. Die LEDs müssen dafür im richtigen Takt ein- und ausgeschaltet werden. Für ein Radumdrehung braucht es etwa 750 ms bei 10 km/h, bei 100 km/h sind das 75 ms (angenommener Radumfang bei einem Rennvelo ist 2.1 m). Der Abstand zwischen zwei LEDs beträgt 5.12 mm, im gleichen Abstand werden die LEDs geschaltet, das ergibt bei Maximalgeschwindigkeit eine Einschaltdauer der LED von 270 us (d.h. weniger als 0.3 Tausendstelsekunde). In dieser Zeit müssen die 16 LEDs auf der Vorderseite und die 16 LEDs auf der Rückseite geschaltet werden.
>
>
Dank dem Stroboskopeffekt entsteht für das Auge den Eindruck, als ob das Bild stehen würde. Die LEDs müssen dafür im richtigen Takt ein- und ausgeschaltet werden. Für ein Radumdrehung braucht es etwa 750 ms bei 10 km/h, bei 100 km/h sind das 75 ms (angenommener Radumfang bei einem Rennvelo ist 2.1 m). Der Abstand zwischen zwei LEDs beträgt 5.12 mm, im gleichen Abstand werden die LEDs geschaltet, das ergibt bei Maximalgeschwindigkeit eine Einschaltdauer der LED von 270 us (d.h. weniger als 0.3 Tausendstelsekunde). In dieser Zeit müssen die 16 LEDs auf der Vorderseite und die 16 LEDs auf der Rückseite geschaltet werden.
 
Changed:
<
<
Strobe.gif (Quelle http://de.wikipedia.org/wiki/Stroboskopeffekt)
>
>
The stroboscopic effect is a visual phenomenon caused by aliasing that occurs when continuous motion is represented by a series of short or instantaneous samples. It occurs when the view of a moving object is represented by a series of short samples as distinct from a continuous view, and the moving object is in rotational or other cyclic motion at a rate close to the sampling rate. It also accounts for the "wagon-wheel effect", so-called because in video or film, spoked wheels on horse-drawn wagons sometimes appear to be turning backwards.

Depending on the frequency of flash, the element appears motionless or rotating in reverse direction.
Strobe_2.gif (Source https://en.wikipedia.org/wiki/Stroboscopic_effect)

 
Line: 24 to 27
 

Comments

<--/commentPlugin-->
Added:
>
>
META FILEATTACHMENT attachment="Strobe_2.gif" attr="" comment="" date="1459114230" name="Strobe_2.gif" path="Strobe_2.gif" size="9807" user="PeterSchmid" version="1"

Revision 12016-03-22 - PeterSchmid

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="EWheelEn"
How does Velo Bling-Bling work?
Dank dem Stroboskopeffekt ensteht für das Auge den Eindruck, als ob das Bild stehen würde. Die LEDs müssen dafür im richtigen Takt ein- und ausgeschaltet werden. Für ein Radumdrehung braucht es etwa 750 ms bei 10 km/h, bei 100 km/h sind das 75 ms (angenommener Radumfang bei einem Rennvelo ist 2.1 m). Der Abstand zwischen zwei LEDs beträgt 5.12 mm, im gleichen Abstand werden die LEDs geschaltet, das ergibt bei Maximalgeschwindigkeit eine Einschaltdauer der LED von 270 us (d.h. weniger als 0.3 Tausendstelsekunde). In dieser Zeit müssen die 16 LEDs auf der Vorderseite und die 16 LEDs auf der Rückseite geschaltet werden.

Strobe.gif (Quelle http://de.wikipedia.org/wiki/Stroboskopeffekt)

-- Peter Schmid - 2014-11-04

Comments

<--/commentPlugin-->
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback