Bling-Bling History

Functional Model

proto1-arduino.jpg
Harnessed with soldered wire-wrap wires
proto1-batterie.jpg
LiPo battery and piggy-back KL25Z
With only 12 LEDs, Freescale FRDM-KL25Z and Arduino Proto Shield. Proof of concept, January 2014.

1. Prototype

proto3-epoxy.jpg
Potted with epoxy glue
With 16 LEDs (one side only), w/ Bluetooth Low Energy (BLE), Microcontroller MKL25Z128VLK4 from Freescale (now NXP), PCB ca. 165 mm x 44 mm. April 2014.

2. Prototype

vergossen-top.jpg
Potted in polyurethane (PUR)
 
With 32 LEDs (front- and backside), new microcontroller MK22DX256VLF from Freescale (NXP), PCB ca. 160 mm x 30 mm. Hardware July 2014, software October 2014.

3. Prototype

proto1.3-bottom-pur.jpg
Potted in polyurethane (PUR)
Minor changes to 2. prototype: accelerometer, Hall effect sensor instead reed switch, mini JTAG connector on backside. Hardware January 2015, software February 2015.

Frame, 3D CAD Model

assembled-top.png
Modeled with OpenSCAD
   

-- Peter Schmid - 2014-10-17

Comments


This topic: Velo > WebHome > EWheelEn > BlingBlingTechnikEn
Topic revision: r3 - 2016-03-29 - PeterSchmid
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback