BluetoothApplication < Velo

Tags: view all tags

%DASHBOARD{ section="dashboard_start" }%
%DASHBOARD{ section="banner"
 image="%PUBURLPATH%/Velo/BluetoothApplication/smartBASIC.png"
 title="Bluetooth Application"
 titlestyle="color:#F00000;"
}%
%DASHBOARD{ section="box_start"  width="992" height="600" }%
---+ BLE Application Software for the Velo Bling-Bling Project

LED lights for bicycle wheels.
16 multi color LEDs on both sides (PCB top- and bottom side).
There are two windows (upper and lower) on both sides for display 
dynamic information like speed, trip time, trip distance, etc. or
static information like strings and images.
The windows have a resolution of 100 x 16 pixels.
The space between the windows can be filled with a pattern/image 
(AKA blingbling).

This application software runs on the BL652 Module (BLE slave) and communicates
over the UART and !I2C interface with the main MCU (!MK22DX256VLF5).

BLE Master (e.g. Smart Phone) <-> BLE Slave BL652 UART & !I2C <-> main MCU 

The BLE Master can use the propriarity vSP Bridge Mode to communicate over the 
UART with the main MCU like a serial terminal (Command Line Interface CLI). The 
Cycling Speed and Cadence Service (CSC) is a standard Bluetooth service, data 
are exchanged between main MCU and BL652 by !I2C.

The USB CDC on the main MCU can be used as a terminal interface for the BL652
module. You can use the [[https://github.com/LairdCP/UwTerminalX][UwTerminalX]] 
for communicating and downloading applications onto Laird's BL652 module.

---++ Copyright

Peter Schmid, Zurich, Switzerland, peter@spyr.ch

This file is part of "Velo Bling-Bling" BLE application software.

"Velo Bling-Bling" software is free software: you can redistribute it
and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of the
License, or (at your option) any later version.

"Velo Bling-Bling" is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with "Velo Bling-Bling". If not, see http://www.gnu.org/licenses/.
%DASHBOARD{ section="box_end" }%
%DASHBOARD{ section="box_start"  width="992" height="600" }%
---+ Tools

---++ UwTerminalX

_UwTerminalX_ is a cross-platform utility for communicating and downloading applications onto Laird's range of wireless modules, and uses Qt 5. !UwTerminalX has been tested on Windows, Mac, Arch Linux and Ubuntu Linux.

More infos and download, see [[https://github.com/LairdCP/UwTerminalX][UwTerminalX]].

---++ Bluetooth Low Energy (BLE) Development Kit DVK-BL600 (optional)

The Laird BLE development kit provides a platform for rapid wireless connectivity prototyping, providing multiple options for the development of Bluetooth Low Energy (BLE) applications.

You do not need a DVK-BL600. 
You can use the Velo Bling-Bling hardware in similar way to develop and download BLE applications, the main controller acts as an USB gateway

---++ Segger J-Link LITE CortexM (optional)

This debug adapter is included in the _Bluetooth Low Energy (BLE) Development Kit DVK-BL600_. This adapter is only needed for downloading a new BL600 firmware, for downloading the application, you can use !UwTerminalX .

%DASHBOARD{ section="box_end" }%
%DASHBOARD{ section="box_start"  width="992" height="600" }%
---+ Get the Software and Download the Application to the Module

---++ Get the Source from the Repository
The Velo Bling-Bling BL652 application software is on the !GitHub repository https://github.com/spyren/veloblingbling-ble. Download the [[https://github.com/spyren/veloblingbling-ble/archive/master.zip][ZIP-File]] and unzip it or better 
[[https://help.github.com/articles/cloning-a-repository/][clone the repository]] e.g. for GNU/Linux:
<pre>
psi@homer:~/veloblingbling/ble> <b>git clone https://github.com/spyren/veloblingbling-ble</b>
Klone nach 'veloblingbling-ble' ...
remote: Counting objects: 265, done.
remote: Compressing objects: 100% (97/97), done.
remote: Total 265 (delta 167), reused 260 (delta 166), pack-reused 0
Empfange Objekte: 100% (265/265), 223.50 KiB | 0 bytes/s, Fertig.
Löse Unterschiede auf: 100% (167/167), Fertig.
Prüfe Konnektivität ... Fertig.
psi@homer:~/veloblingbling/ble>
</pre>

---++ Download the Application into the BL652 Module

---+++ 1. Connect Terminal 

Connect the the Velo Bling-Bling USB to the PC with a Micro-USB cable. Start the terminal program (!UwTerminalX or !UwTerminal). Choose the the communication (serial) port and click the OK button.

<img src="%ATTACHURLPATH%/UwTerminalX-config.png" alt="UwTerminalX-config.png" width="715" height="465" />

Press the '>' key and then the Return key, wait for the =CLI>= prompt.

<img src="%ATTACHURLPATH%/UwTerminalX-terminal.png" alt="UwTerminalX-terminal.png" width="716" height="464" />

and type
<verbatim>
CLI> ble reset
CLI> ble trans
</verbatim>

Show the firmware version:
<verbatim>
ati 3
</verbatim>


---+++ 2. Delete the File System
<verbatim>
atz 
at&f 1
</verbatim>

<img src="%ATTACHURLPATH%/erase-ffs.png" alt="erase-ffs.png" width="643" height="421" />


---+++ 3. Download and Compile the BLING Application

Press the right mouse button and select =XCompile + Load=. Choose the file =bling.vsp.sb= .
<img src="%ATTACHURLPATH%/UwTerminalX-compile.png" alt="UwTerminalX-compile.png" width="935" height="644" />

<img src="%ATTACHURLPATH%/UwTerminalX-compile2.png" alt="UwTerminalX-compile2.png" width="718" height="465" />

---+++ 4. Download and Compile the LP Application

Press the right mouse button and select =XCompile + Load=. Choose the file =lp.low.power.deep.sleep.sb= .


---+++ 5. Check Filesystem
<verbatim>
at+dir
</verbatim>
The applications =lp= and =bling= have to be listed.

<img src="%ATTACHURLPATH%/dir.png" alt="dir.png" width="642" height="422" />

Press Ctrl-D to exit transparent mode. !UwTerminalX can not send special characters, workaround: press the right mouse button and select =batch=. Choose the file =exit.txt= (this file contains only a Ctrl-D).  


---++ Update the BL600/BL652 Firmware

This is only needed if you want to use a new BL600/BL652 firmware (Velo Bling-Bling works with version 1.5.70.0 and newer, 1.2.54.0 is not tested). Firmware update is only possible with a debug adapter (e.g. Segger J-Link LITE CortexM) over the JTAG interface. 

---+++ 1. Connect Terminal 

Connect the the Velo Bling-Bling USB to the PC with a Micro-USB cable. Start a terminal program (e.g. !UwTerminalX). Hit the Escape-Key, wait for the =CLI>= prompt and type
<verbatim>
CLI> ble reset
CLI> ble trans
</verbatim>

Show the firmware version:
<verbatim>
ATI 3
10    3    1.2.54.0
00
</verbatim>
 
---+++ 2. Connect Debug Adapter
Connect a debug adapter to the JTAG connector. 

---+++ 3. Save the License Key
With a terminal program (e.g. !UwTerminalX):
<verbatim>
ATI 49406
10      49406   1696553225C4BC8CE19A
</verbatim>
Write down the license key (similar to =1696553225C4BC8CE19A=)

---+++ 4. Download the Firmware
On a Windows-PC start the the firmware batch program
<verbatim>
_DownloadFirmware_v1_5_70_0.bat unlicensed
</verbatim>

---+++ 5. Restore the License Key
With a terminal program (e.g. !UwTerminalX):
<verbatim>
AT+LIC "1696553225C4BC8CE19A"
</verbatim>


%DASHBOARD{ section="box_end" }%
%DASHBOARD{ section="box_start"  width="992" height="600" }%
---+ BL600 Module from LAIRD Systems

<img src="%ATTACHURLPATH%/BL600_SA.jpg" alt="BL600_SA.jpg" width="500" height="409" />

http://www.lairdtech.com/products/BL600-series

   * smartBASIC for application programs
   * AT-Commands over UART
   * A complete BLE 4.0 software stack (single mode)!
   * nRF51822 chipset (ARM Cortex M0)
   * 19 x 12.5 x 3.2 mm
   * About $14 (Mouser, Farnell)

%DASHBOARD{ section="box_end" }%
%DASHBOARD{ section="box_start"  width="992" height="600" }%
---+ BL652 Module from LAIRD Systems

<img src="%ATTACHURLPATH%/BL652-SA_JPG-500.jpg" alt="BL652-SA_JPG-500.jpg" width="500" height="395" />

<img src="%ATTACHURLPATH%/BL652-s.jpg" alt="BL652-s.jpg" width="900" height="494" />



http://www.lairdtech.com/products/bl652-ble-module

   * smartBASIC for application programs
   * AT-Commands over UART
   * A complete BLE 4.2 software stack (dual mode, peripheral/central)!
   * nRF52832 chipset (ARM Cortex M4)
   * 14 mm x 10 mm x 2.1 mm
   * About $8 (Mouser, Farnell)

%DASHBOARD{ section="box_end" }%

%DASHBOARD{ section="dashboard_end" }%



-- %USERSIG{PeterSchmid - 2016-03-30}%

---++ Comments

%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who
jpg	BL600_SA.jpg	r1	manage	24.3 K	2016-05-23 - 11:43	PeterSchmid
jpg	BL652-SA_JPG-500.jpg	r1	manage	35.5 K	2016-11-06 - 18:18	PeterSchmid
jpg	BL652-s.jpg	r1	manage	124.1 K	2016-11-13 - 09:01	PeterSchmid
png	UwTerminalX-compile.png	r1	manage	282.5 K	2016-11-06 - 17:40	PeterSchmid
png	UwTerminalX-compile2.png	r1	manage	62.8 K	2016-11-06 - 17:40	PeterSchmid
png	UwTerminalX-config.png	r1	manage	99.9 K	2016-11-06 - 17:40	PeterSchmid
png	UwTerminalX-terminal.png	r1	manage	59.9 K	2016-11-06 - 17:40	PeterSchmid
png	cli.png	r2 r1	manage	56.2 K	2016-05-23 - 14:12	PeterSchmid
png	connect-UwTerminal.png	r2 r1	manage	55.2 K	2016-05-23 - 14:19	PeterSchmid
png	dir.png	r1	manage	39.5 K	2016-05-23 - 14:08	PeterSchmid
png	erase-ffs.png	r2 r1	manage	56.9 K	2016-05-23 - 14:16	PeterSchmid
png	lp-download.png	r1	manage	283.4 K	2016-05-23 - 13:17	PeterSchmid
png	smartBASIC.png	r1	manage	28.9 K	2016-03-31 - 09:43	PeterSchmid

Topic revision: r10 - 2016-11-13 - PeterSchmid