Line: 1 to 1 | ||||||||
---|---|---|---|---|---|---|---|---|
%DASHBOARD{ section="banner" | ||||||||
Line: 77 to 77 | ||||||||
Changed: | ||||||||
< < | The Rx buffer is 20 k, the Tx buffer 1 k. Copy and past source code into the terminal is possible without buffer overrun. | |||||||
> > | The Rx buffer is 5 k, the Tx buffer 1 k. Copy and past source code into the terminal is possible without buffer overrun. | |||||||
USB-CDC on the ST-LINK Micro USB connector on the MB1355 Nucleo Board. Serial port UART1 on PB6/PB7 (remove jumper SB2, close jumper SB6) on the MB1293 dongle. Do not forget to set the baud rate. The default baud rate for the MecrispCube is 115200 baud, e.g. microcom -D /dev/ttyACM1 -s 115200 .
|