Firmware for the Velo Bling-Bling project

LED lights for bicycle wheels. 16 multi color LEDs on each side (PCB top- and bottom side). There are two windows (upper and lower) on each side for display dynamic information like speed, trip time, trip distance, etc. or static information like strings and images. The windows have a resolution of 100 x 16 pixels. The space between the windows can be filled with a pattern/image (AKA blingbling).

Target system is a proprietary PCB (eWheel32 V1.4 an newer) with a MK22DX256VLF5 MCU from Freescale/NXP. The PCB is free hardware, see https://github.com/spyren/veloblingbling-pcb

There is also optional Bluetooth Low Energy (Smart) subsystem on board. It is a LAIRD BL600 module. The application software is also on GitHub: https://github.com/spyren/veloblingbling-ble

It is possible to mount die PCB direct onto the wheel spokes but it is better to use a mounting frame. This frame can be ordered from http://shapeways.com or you can print it by yourself on 3D printer. https://github.com/spyren/veloblingbling-frame

Copyright

Peter Schmid, Switzerland, peter@spyr.ch

This file is part of "Velo Bling-Bling" main MCU firmware.

"Velo Bling-Bling" firmware is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

"Velo Bling-Bling" is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with "Velo Bling-Bling". If not, see <http://www.gnu.org/licenses/>.