Funktionsmuster

Error: (3) can't find proto1-arduino.jpg in Velo

Error: (3) can't find proto1-batterie.jpg in Velo

Mit 12 LEDs, Freescale FRDM-KL25Z und Arduino Proto Shield. Proof of Concept (Machbarkeitsnachweis). Januar 2014.

1. Prototyp

Error: (3) can't find proto2.jpg in Velo

Error: (3) can't find DSCN2361.JPG in Velo

Error: (3) can't find DSCN2359.JPG in Velo

Error: (3) can't find DSCN2360.JPG in Velo

Error: (3) can't find proto3-epoxy.jpg in Velo

Mit 16 LEDs, inkl. Bluetooth Low Energy (BLE), Microcontroller MKL25Z128VLK4 von Freescale, ca. 165 mm x 44 mm gross. April 2014.

2. Prototyp

Error: (3) can't find proto3-pcb.jpg in Velo	Error: (3) can't find proto3-hr.jpg in Velo	Error: (3) can't find proto3-vr.jpg in Velo
Error: (3) can't find vergossen-top.jpg in Velo	Error: (3) can't find vergossen-bottom.jpg in Velo

Mit 32 LEDs (jeweils 16 vorne und hinten), neuer Microcontroller MK22DX256VLF von Freescale, ca. 160 mm x 30 mm gross. Hardware etwa Juli 2014, Software Oktober 2014.

3. Prototyp

Error: (3) can't find proto1.3-top.jpg in Velo

Error: (3) can't find proto1.3-bottom.jpg in Velo

Error: (3) can't find proto1.3-top-pur.jpg in Velo

Error: (3) can't find proto1.3-bottom-pur.jpg in Velo

Nur wenig Änderungen gegenüber 2. Prototyp. Neu: Beschleunigungssensor, Hall-Sensor statt Reed, JTAG-Stecker auf Rückseite. Hardware etwa Januar 2015, Software Februar 2015.

Gehäuse, 3D CAD Modell

Error: (3) can't find assembled-top.png in Velo	Error: (3) can't find assembled-bottom.png in Velo	Error: (3) can't find unterteil.png in Velo	Error: (3) can't find oberteil.png in Velo
Error: (3) can't find 3d-print-top.jpg in Velo	Error: (3) can't find 3d-print-bottom.jpg in Velo

-- Peter Schmid - 2014-10-17

Comments