Hub Dynamo Charger
- Charger
- 4 Ah
- max. 2 A
- Charging time about 12 h
- BLE Cycle Sensor
- Cyclocomputer
- OLED Display 64x128
- Current speed
- Maximum speed
- Average speed
- Trip distance
- Total distance
- Altitude
- Trip elevation gain
- Total elevation gain
- Maximum altitude
- Incline
- Temperature
- Trip time
- Time
- Stopwatch
STM32WB Feather Development Board
BoardSupportPackageWBfeather
Feather OLED 64x128 Display
Battery
Li-Ion Battery Pack HY-LINE H2B179.1
https://www.distrelec.ch/Web/Downloads/_t/ds/HY%20Line-H2B179.1_eng_tds.pdf
, CHF62
- 1S2P-Configuration
- Vnom 3.6 V, 6666 mAh
- Integrated protection circuit
- Premium quality Sanyo cell NCR18650B
- Shrink foil
- No memory effect
- 100 g, 66 x 40 x 19 mm
Safety protection board
Cut off voltage |
4.28 +/- 0.025 V |
Over charge release |
4.08 +/- 0.025 V |
End of discharge voltage |
2.8 +/- 0.050 V |
Over discharge release |
2.8 +/- 0.050 V |
Over current detection |
4.05 +/- 0.085 A |
Over discharge delay time |
144 +/- 29 ms |
https://www.mouser.com/ProductDetail/Ultralife/UBBL23-FL
, 4.8 Ah, $85
18650 Single cell
DC-DC Converter 3.7 V (Battery) to 5.0 V (USB Out)
- mEZD41502A-A
- 2.7 V - 4.2 V Input, 2 A, 5V Output, Step-Up Power Supply
- Mouser # 946-MEZD41502A-A
$15
DC-DC Converter 7 V (Rectified Dynamo Voltage) to 5 V (Charger, Feather Board)
- DF005S - DF10S Bridge Rectifier 1.5 A
- 470 uF / 35 V
- Transient voltage suppressor 24 V, peak pulse 600 W, SMBJ24A
Pressure (Altitude) Sensor
Measurement
Voltage
- Dynamo voltage: 4 to 25 V
- Battery voltage: 2.5 to 4.2 V
Current
- Mouser # INA180A3
, gain 100
- USB out current: Shunt 10 mOhm -> 2 A -> 2 V
- Battery charge current: Shunt 50 mOhm -> 0.5 A -> 2.5 V
--
Peter Schmid - 2022-01-21
Comments
This topic: Velo
> WebHome > HubDynamoCharger
Topic revision: r4 - 2022-01-24 - PeterSchmid