Difference: UserManual (4 vs. 5)

Revision 52016-03-31 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="EWheelEn"
%DASHBOARD{ section="banner" image="/twiki/pub/Velo/BetaTest/header2.jpg"
Changed:
<
<		 title="User Manual"
>
>		 title="User Manual, Short Tutorial"
  titlestyle="color:#F00000;" }%
Changed:
<
<

Command Line Interface

You can use the command line interface CLI over USB CDC or Bluetooth LE vSP.
>
>

Pushbutton Operation

  • Short pressure: start trip (green LD1) ⇄ stop trip (red LD1)
  • Double click: reset trip (blue LD1)
  • Long pressure: LEDs enabled (white LD1) ⇄ LEDs disabled (orange LD1)
  • Hold button while reset (connect to battery): restore factory settings (magenta LD1)
 
Changed:
<
<		Terminalprogramm um Velo Bling-Bling über Bluetooth 4.0 zu bedienen:
>
>

Command-Line Interface

Terminal Emulator

You can use the command-line interface CLI over USB CDC or Bluetooth LE vSP. You need an application for the PC or an app for the smartphone.

Terminal emulator app for smartphones over Bluetooth 4.0 (vSP BLE profile is proprietary, there is no standard serial communication profile):

 
Added:
>
>		After a successful connection the LED LD16 is on (blue).
 
Changed:
<
<		Terminalprogramm um Velo Bling-Bling über USB zu bedienen:
>
>		Terminal emulator applications for PCs. You have to connect the Velo Bling-Bling with an USB cable to the PC:
 
Added:
>
>		After the connector is plugged in, LED LD14 goes on (green or yellow). Additionally a LED from LD1 to LD13 goes on, those LEDs show the battery level, LD1 (red) is lowest, LD13 (green) is highest (battery fully charged). If you push the ESC key now, the LEDs go off and similar text is showed: 
Euler Wheel 32, Velo Bling Bling                                                                                  
--------------------------------                                                                                  

Version 4.2rc1, 2016/02/01, Copyright Peter Schmid                                                                

Normal operation mode (automatically), hit ESC for command line interface (interactive mode)                      
Command Line Interface (interactive mode).                                                                        
CLI>

Basic Configuration

  Hier ein paar Beispiele, wie man das Bling-Bling konfiguriert. Es müssen nur die fett geschriebenen Zeichen eingegeben werden.
Line: 47 to 71
 CLI> set lower string
Added:
>
>

Images

 Man kann auch Bilder mit der Escape-Sequenz \i<nn> in den String einfügen, z.B. die Schweizer Flagge mit \i00. Weitere Escape-Sequenzen: 
 *     _      Space
Line: 144 to 169
 20150327190034
Added:
>
>

Overview Commands

 Übersicht Befehle:
Changed:
<
<		 * Command Line Interface (CLI, interactive mode) * * show all * set upper|lower speed|max|avg|trip|tot|alt|inc|temp|cad|watch|time|stop|string|blk|img|light * set bling blk|img * show currentspeed|speed [m/s] * show maximumspeed|max [m/s] * show averagespeed|avg [m/s] * show tripdistance|trip [m] * show|set totaldistance|tot [m] * show currentaltitude|alt [m] * show tripelevationgain|gain [m] * show|set totalelevationgain|totgain [m] * set altimeteroffset|alti [m] * show incline|inc [%] * show temperature|temp [°C] * show pedalingcadence|cad [/Min] * * show|set currenttime|watch yyyymmddhhmmss * show triptime|time [s] * show|set totaltime|tottime [s] * show chronotime|chrono [s] * * show datalog * * show|set circumference|circ [m] * show|set unit imperial|metric * show|set stretch * show|set side left|right * show|set wheel front|rear * show|set logintervall|log [s] * show|set delay [°] * show|set surface top|bottom * * show|set upper|lower speed|max|avg|trip|tot|alt|inc|temp|cad|watch|time|stop|str|blk|img|light * show|set bling str|blk|img * * show|set color upper|lower rd|gn|yl|bl|ma|cy|wt * * show|set pattern number [0..49] * rrrrrrrrrrrr * rrrrrwwrrrrr * rrrrrwwrrrrr * rrwwwwwwwwrr * rrwwwwwwwwrr * rrrrrwwrrrrr * rrrrrwwrrrrr * rrrrrrrrrrrr * . * show|set string upper|lower anystring * show|set image upper|lower|bling number * * log start [yyyymmddhhmmss] * log stop * * clear logdata * clear factoryset|all * * trip start|stop|pause|resume * * test * about * help * reset * exit * * mode speed|trip|tot|alt|cad|watch|time|stop|string|blk|pic
>
>		show all set upper|lower speed|max|avg|trip|tot|alt|inc|temp|cad|watch|time|stop|string|blk|img|light set bling blk|img show currentspeed|speed [m/s] show maximumspeed|max [m/s] show averagespeed|avg [m/s] show tripdistance|trip [m] show|set totaldistance|tot [m] show currentaltitude|alt [m] show tripelevationgain|gain [m] show|set totalelevationgain|totgain [m] set altimeteroffset|alti [m] show incline|inc [%] show temperature|temp [°C] show pedalingcadence|cad [/Min]

show|set currenttime|watch yyyymmddhhmmss show triptime|time [s] show|set totaltime|tottime [s] show chronotime|chrono [s]

show datalog

show|set circumference|circ [m] show|set unit imperial|metric show|set stretch show|set side left|right show|set wheel front|rear show|set logintervall|log [s] show|set delay [°] show|set surface top|bottom

show|set upper|lower speed|max|avg|trip|tot|alt|inc|temp|cad|watch|time|stop|str|blk|img|light show|set bling str|blk|img

show|set color upper|lower rd|gn|yl|bl|ma|cy|wt

show|set pattern number [0..49] rrrrrrrrrrrr rrrrrwwrrrrr rrrrrwwrrrrr rrwwwwwwwwrr rrwwwwwwwwrr rrrrrwwrrrrr rrrrrwwrrrrr rrrrrrrrrrrr . show|set string upper|lower anystring show|set image upper|lower|bling number

trip start|stop|pause|resume

test about help reset exit

 
Added:
>
>

Fonts

 Das Display ist 100x16 Pixel gross. Im Beispiel unten ist die 12 in 8x12 Font, der : ist in 5x12 und das "A" in 12x16 Font. 
        0 1 2 3 4 5 6 7 8 9 A B C D E F101122131415161718191A1B1C1D1E1F2021..
Line: 239 to 256
 

Changed:
<
<

Terminology

>
>

Terminology

Display

vbb-images-s.png
 
Changed:
<
<
>
>		In this example the upper display shows the current speed and the lower display the string veloblingbling. Each side has its own independent upper an lower display (see Surface below).
 
Changed:
<
<

Eintastenbedienung

Kurzer Tastendruck: Start Trip (grün) / Stopp Trip (rot)
>
>		Between these two displays there is another display called bling. If the upper or lower display is blank and bling display is not blank, the bling image/string is showed instead. The bling image is repeated till the end of the rotation, see the rear wheel in the video: the upper display shows the trip distance, the bling display shows the repeated image with the Swiss, German, French, and Italian Flags. After each rotation the image is turned counterclockwise 4 pixels.
 
Changed:
<
<		Doppelklick: Reset Trip (blau)
>
>

Surface

The Velo Bling-Bling side with the button is called top surface (usually the left side), the other side bottom surface.
 
Changed:
<
<		Langer Tastendruck: LEDs ein (weiss) / LEDs aus (orange)
>
>

Mode

 
Added:
>
>

Image

Is picture with a height of 16 pixels (the number of LEDs) and a maximum length of 100 pixels.
 
Added:
>
>

String

Trip

 
View topic | History: r14 < r13 < r12 < r11 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback