Difference: SangoSRRL18 (1 vs. 20)

Revision 202024-02-18 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 8 to 8
  titlestyle="color:#F00000;" }%
Sango
Changed:
<
<		HOn30 brass locomotive kit re-released by Toma at the end of 2015 (first release in 1982).
>
>		HOn30 brass locomotive kit re-released by Toma at the end of 2015 (first release in 1982).
 
sango-srrl-18-1.jpg
Enlarge
sango-srrl-18-2.jpg
Enlarge

Revision 192022-12-22 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 31 to 31
 
Chassis / Frame

Chassis / Frame

Changed:
<
<		The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit. The motor is excellent but way too fast, about 28'000 rpm = 467 /s. With reduction gear of 1:24 (19.4 /s) the speed at 12 V is (driving wheel diameter 9 mm) v = 9 mm * Pi * 19.4 /s = 550 mm/s = 0.55 m/s, vproto= 0.55 m/s * 87 = 47.8 m/s = 172 km/h.
>
>		The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit. The motor is excellent but way too fast, about 28'000 rpm = 467 /s. With reduction gear of 1:24 (19.4 /s) the speed at 12 V is (driving wheel diameter 9 mm) v = 9 mm * Pi * 19.4 /s = 550 mm/s = 0.55 m/s, vproto= 0.55 m/s * 87 = 47.8 m/s = 172 km/h.
 
chassis-no18.jpg
Enlarge
headlight.jpg
Enlarge
Working Headlight (LED potted in clear 5 Min epoxy, 30 AWG magnet wire)

Revision 182021-02-02 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 84 to 84
 

Wiring

Deleted:
<
<
E6-connector.jpg
Enlarge
 
Color NMRA JST Pin# Function
Black 2 Left Rail Pickup
Yellow 4 [Backup Light]
Line: 109 to 107
 

Sound Configuration

Added:
>
>		Draft
 
Function CV Value Type
Sound Configuration 1 112 4  
Fuel Type   +1+2, 0 Hand-shoveled Coal
Line: 129 to 129
 

Motor Configuration

Added:
>
>		Draft
 
Function CV Value Type
Baseline Acceleration Rate 3 0 no momentum
Baseline Deceleration Rate 4 0 no momentum

Revision 172021-02-01 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 12 to 12
 
sango-srrl-18-1.jpg
Enlarge
sango-srrl-18-2.jpg
Enlarge
Added:
>
>		http://www.happy-farm.gr.jp/railway-model-gallery/HO_sango_SRRL_2-6-2.html
 
Prototype
Sandy River and Rangeley Lakes Railroad

Revision 162020-05-06 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 32 to 32
 

Chassis / Frame

The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit. The motor is excellent but way too fast, about 28'000 rpm = 467 /s. With reduction gear of 1:24 (19.4 /s) the speed at 12 V is (driving wheel diameter 9 mm) v = 9 mm * Pi * 19.4 /s = 550 mm/s = 0.55 m/s, vproto= 0.55 m/s * 87 = 47.8 m/s = 172 km/h.
Changed:
<
<
chassis-no18.jpg
Enlarge
>
>
chassis-no18.jpg
Enlarge
headlight.jpg
Enlarge
Working Headlight (LED potted in clear 5 Min epoxy, 30 AWG magnet wire)
 

BOM

Line: 51 to 51
 
483-6-web.jpg
Enlarge
NWSL U-Joint
Deleted:
<
<
headlight.jpg
Enlarge
Working Headlight (LED potted in clear 5 Min epoxy, 30 AWG magnet wire)
 

Wiring

Revision 152020-05-05 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 49 to 49
 
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon cable
Added:
>
>
483-6-web.jpg
Enlarge
NWSL U-Joint

headlight.jpg
Enlarge
Working Headlight (LED potted in clear 5 Min epoxy, 30 AWG magnet wire)
 

Wiring

Color NMRA JST Pin# Loco Header Pin# Function
Line: 185 to 189
 
META FILEATTACHMENT attachment="chassis-no18.jpg" attr="" comment="" date="1588674656" name="chassis-no18.jpg" path="chassis-no18.jpg" size="730770" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="tender-bottom-no18.jpg" attr="" comment="" date="1588674656" name="tender-bottom-no18.jpg" path="tender-bottom-no18.jpg" size="254924" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="tender-top-no18.jpg" attr="" comment="" date="1588674656" name="tender-top-no18.jpg" path="tender-top-no18.jpg" size="204370" user="PeterSchmid" version="1"
Added:
>
>
META FILEATTACHMENT attachment="headlight.jpg" attr="" comment="" date="1588711268" name="headlight.jpg" path="headlight.jpg" size="136159" user="PeterSchmid" version="1"

Revision 142020-05-05 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 37 to 37
 

BOM

Deleted:
<
<
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon cable
 
  • U-Joint 1.5 mm shaft NWSL #487-6
  • LED warm white for headlight e.g. PLCC2
Changed:
<
<
>
>
  • LED red for ashpan e.g. PLCC2 VLMS30J1K2-GS08
 
  • LED yellow for ashpan e.g. PLCC2 VLMY3000-GS08
  • 2 PCS SMD Resistor 1 kOhm 1206
  • PC-Board ROTH Elektronik RE 437
  • Magnet Wire e.g. 30 AWG from Spark Fun
  • Mounting Tape Tesa 55740
  • Clear 5 Min Epoxy for potting the headlight LED
Added:
>
>
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon cable
 

Wiring

Line: 122 to 122
 
Coupler Select 126    
Poppet Valve Release Rate 200    
Added:
>
>
 

Motor Configuration

Function CV Value Type
Changed:
<
<
Low-Speed Compensation 211 150?  
>
>
Baseline Acceleration Rate 3 0 no momentum
Baseline Deceleration Rate 4 0 no momentum
BEMF Cutoff 10    
PID Kp Parameter 209    
PID Ki Parameter 210    
Low-Speed Compensation 211    
BEMF Feedback Intensity 212    
Low-Speed Compensation 211    
BEMF Sample Period 213   default 15
BEMF Sample Aperture Time 214   default 15
BEMF Reference Voltage 215   6 to 25.5 V (60 .. 255)

https://sites.google.com/site/markgurries/home/decoders/decoder-motor-tuning/soundtraxx

Notes from the Internet:

  1. CV213/14: Adjusting CV213 can achieve very good low speed at the expense of full speed. You have to strike a balance but try values between 5 & 10. The default setting of 15 in both CV213/14 appears to be too high for a lot of motors. But keep CV213/14 set to the same value what ever you end up with. Setting CV214 to a value 3x CV213 will stop the motor in its tracks unless you bring the speed step way up.
  2. There is a report that using the User Defined Speed Table CV 25 defeats the BEMF tweaks you make. The idea here was to make up for the effects CV213 had on the speed range. [3]
  3. Recent test that achieve good results with CV213/14 set to 5 first. Then set CV209 (Proportional) to max 255. Then reduce CV212 (Intensity) to get it to run smooth which was about 80. Playing with CV210 (Static) did not seem to change much at slow speeds.

Mark G Notes:

  1. It seems that CV213 is the first one to set for low speed performance before doing anything else. Given the BEMF is weakest at low speeds, you need to increase the sample rate (decrease sample period or make CV213 smaller) to increase the BEMF data to obtain any chance of good BEMF performance. The question is what to set the other CV’s to allow you to determine the best setting of CV213. This concept appears to be correct based on one credible internet report. Procedure: Leave all other BEMF CV’s at their factory default and only adjusting CV213 and 214 down between 5 and 10 but with identical values between the two will improve performance. A value of 8 is a good place to start.
  2. Given CV213 effect on top speed, it seems that CV213 should be dynamic and may in fact be the trick used by other BEMF decoders to get extended slow speed performance. Sample period goes up as the speed step goes down. Sample period goes down and the speed step goes up. This would get you the best of both worlds.
  3. Adjustment should be done with momentum and start voltage all set to zero. [1]
 

Revision 132020-05-05 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 32 to 32
 

Chassis / Frame

The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit. The motor is excellent but way too fast, about 28'000 rpm = 467 /s. With reduction gear of 1:24 (19.4 /s) the speed at 12 V is (driving wheel diameter 9 mm) v = 9 mm * Pi * 19.4 /s = 550 mm/s = 0.55 m/s, vproto= 0.55 m/s * 87 = 47.8 m/s = 172 km/h.
Added:
>
>
chassis-no18.jpg
Enlarge
 

BOM

Line: 64 to 66
 
Tender, Sound

Tender, Sound

Changed:
<
<
tender-speaker-holes.jpg
Enlarge
>
>
tender-speaker-holes.jpg
Enlarge
tender-bottom-no18.jpg
Enlarge
tender-top-no18.jpg
Enlarge
 

BOM

Line: 143 to 146
 -- Peter Schmid - 2018-12-25
Deleted:
<
<
  • 45106-000030.JPG:
    45106-000030.JPG
 
META FILEATTACHMENT attachment="sango-srrl-18-b.png" attr="" comment="" date="1545911565" name="sango-srrl-18-b.png" path="sango-srrl-18-b.png" size="114842" user="PeterSchmid" version="3"
META FILEATTACHMENT attachment="sango-srrl-18-1.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-1.jpg" path="sango-srrl-18-1.jpg" size="3828122" user="PeterSchmid" version="1"
Line: 154 to 155
 
META FILEATTACHMENT attachment="3mtm-ribbon-cable-socket-451-series-family.jpg" attr="" comment="" date="1588450876" name="3mtm-ribbon-cable-socket-451-series-family.jpg" path="3mtm-ribbon-cable-socket-451-series-family.jpg" size="10901" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="45106-000030.JPG" attr="" comment="" date="1588451236" name="45106-000030.JPG" path="45106-000030.JPG" size="8846" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="45106-000030.jpg" attr="" comment="" date="1588451852" name="45106-000030.jpg" path="45106-000030.jpg" size="31573" user="PeterSchmid" version="2"
Added:
>
>
META FILEATTACHMENT attachment="chassis-no18.jpg" attr="" comment="" date="1588674656" name="chassis-no18.jpg" path="chassis-no18.jpg" size="730770" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="tender-bottom-no18.jpg" attr="" comment="" date="1588674656" name="tender-bottom-no18.jpg" path="tender-bottom-no18.jpg" size="254924" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="tender-top-no18.jpg" attr="" comment="" date="1588674656" name="tender-top-no18.jpg" path="tender-top-no18.jpg" size="204370" user="PeterSchmid" version="1"

Revision 122020-05-04 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 7 to 7
  text="Hallo" titlestyle="color:#F00000;" }%
Changed:
<
<
Sango
>
>
Sango
 HOn30 brass locomotive kit re-released by Toma at the end of 2015 (first release in 1982).
sango-srrl-18-1.jpg
Enlarge
sango-srrl-18-2.jpg
Enlarge

Changed:
<
<
Prototype
>
>
Prototype
 Sandy River and Rangeley Lakes Railroad
S. R. & R. L. #18
Line: 25 to 25
 
srrl-18.jpeg
Enlarge

Changed:
<
<
Contents
>
>
Contents
 
Chassis / Frame

Revision 112020-05-03 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 30 to 30
 
Chassis / Frame

Chassis / Frame

Changed:
<
<		The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit.
>
>		The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit. The motor is excellent but way too fast, about 28'000 rpm = 467 /s. With reduction gear of 1:24 (19.4 /s) the speed at 12 V is (driving wheel diameter 9 mm) v = 9 mm * Pi * 19.4 /s = 550 mm/s = 0.55 m/s, vproto= 0.55 m/s * 87 = 47.8 m/s = 172 km/h.
 

BOM

Revision 102020-05-03 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 37 to 37
 
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon cable
Added:
>
>
  • U-Joint 1.5 mm shaft NWSL #487-6
 
  • LED warm white for headlight e.g. PLCC2
  • LED red for ashpan e.g. PLCC2 VLMS30J1K2-GS08
  • LED yellow for ashpan e.g. PLCC2 VLMY3000-GS08

Revision 92020-05-02 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 14 to 14
 
Prototype
Changed:
<
<		Sandy River and Rangeley Lakes Railroad S. R. & R. L. #18
>
>		Sandy River and Rangeley Lakes Railroad
S. R. & R. L. #18
  Wikipedia: Built by Baldwin Locomotive Works in 1893 for Sandy River Railroad (No. 2) as a 2-6-0. Rebuilt in 1916 as 2-6-2. New tender built by Baldwin Locomotive Works in 1926. Scrapped 1936.
Line: 31 to 32
 

Chassis / Frame

The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit.
Added:
>
>
 

BOM

Changed:
<
<
  • Pin Socket 2.54 mm (1/10") 3x2
  • White LED
  • Red LED
  • Yellow LED
  • Resistor 1 k, 3 pcs
>
>
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon cable
  • LED warm white for headlight e.g. PLCC2
  • LED red for ashpan e.g. PLCC2 VLMS30J1K2-GS08
  • LED yellow for ashpan e.g. PLCC2 VLMY3000-GS08
  • 2 PCS SMD Resistor 1 kOhm 1206
  • PC-Board ROTH Elektronik RE 437
  • Magnet Wire e.g. 30 AWG from Spark Fun
  • Mounting Tape Tesa 55740
  • Clear 5 Min Epoxy for potting the headlight LED
 

Wiring

Line: 49 to 56
 
Green 9 5 FX3 (Ashpan Flicker CV 51: 23+128=151, F24)
Blue 6 6 Function Common (+12V)
Added:
>
>		3M™ Ribbon Cable Wiremount Socket Assembly, 1.27 mm (0.050") Pitch, 451 Series, Digi-Key 45106-000030, Mouser 517-45106-000030
45106-000030.jpg
Enlarge
 
Changed:
<
<
Tender, Sound
>
>
Tender, Sound
 

Tender, Sound

tender-speaker-holes.jpg
Enlarge

BOM

Changed:
<
<
  • TSU-1100 Steam-2 (1 Amp) Tsunami2 Decoder - Steam, SoundTraxx #884006
  • 20 mm Speaker, SoundTraxx 810053
  • 20 mm Speaker Gasket Kit, SoundTraxx #810118
  • Pin Header 2.54 mm (1/10") 3x2
>
>
  • TSU-1100 Steam-2 (1 Amp) Tsunami2 Decoder - Steam, SoundTraxx #884006
  • 20 mm Speaker, SoundTraxx #810053
  • 20 mm Speaker Gasket Kit, SoundTraxx #810118
  • Bipolar Capacitor 220 uF 25V, SoundTraxx #810128 (included in TSU-1100)
  • Ribbon Cable Wiremount Socket Assembly, 1.27 mm, 3x2, Mouser #517-45106-000030
  • Ribbon Cable
 

Wiring

Line: 71 to 84
 
Blue 6 [Function Common (+12V)]
Purple - Speaker (+)
Purple - Speaker (-)
Changed:
<
<
Blue - Current Keeper [Function Common (+12V)?]
Black - Current Keeper [Ground?]
>
>
Blue 6 Current Keeper [Function Common (+12V)]
Green/Yellow - Current Keeper [Ground]
Green 9 FX3 not connected
Brown 1 FX4 not connected
 

Superstructure

Superstructure

Changed:
<
<
DCC Decoder
>
>
DCC Decoder
 

DCC Decoder

Added:
>
>		Loco #18, ashpan F24

Sound Configuration

Function CV Value Type
Sound Configuration 1 112 4  
Fuel Type   +1+2, 0 Hand-shoveled Coal
Injector   +4, 4 lifting
Power reverser   +8, 0 disabled
3-cylinder exhaust   +16, 0 disabled
Articulated wheel-slip   +32+64, 0 disabled
Articulated exhaust   +128, 0 disabled
Engine Exhaust Control 114 90? faster, for 4 chuffs per revolution
Whistle 120 2 Baldwin Single-Chime
Bell 122 5 Light Brass (1)
Exhaust Chuffs 123 0 Light (1)
Airpump 124 0 Single-Phase (1)
Dynamo 125 0 Dynamo (1)
Coupler Select 126    
Poppet Valve Release Rate 200    

Motor Configuration

Function CV Value Type
Low-Speed Compensation 211 150?  
 

ToDo

ToDo

Deleted:
<
<
  • Dogbone, cups, 2 Stk ID 1.5 x 2 mm, Achse kürzen
 
  • Front light, small LED
  • Chassis 1 mm Loch ausbohren, 1 mm Schraube
  • Piston verlängern
Line: 100 to 141
  -- Peter Schmid - 2018-12-25
Added:
>
>
  • 45106-000030.JPG:
    45106-000030.JPG
 
META FILEATTACHMENT attachment="sango-srrl-18-b.png" attr="" comment="" date="1545911565" name="sango-srrl-18-b.png" path="sango-srrl-18-b.png" size="114842" user="PeterSchmid" version="3"
META FILEATTACHMENT attachment="sango-srrl-18-1.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-1.jpg" path="sango-srrl-18-1.jpg" size="3828122" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="sango-srrl-18-2.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-2.jpg" path="sango-srrl-18-2.jpg" size="3659528" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="srrl-18.jpeg" attr="" comment="" date="1545938563" name="srrl-18.jpeg" path="srrl-18.jpeg" size="38371" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="tender-speaker-holes.jpg" attr="" comment="" date="1546712779" name="tender-speaker-holes.jpg" path="tender-speaker-holes.jpg" size="211816" user="PeterSchmid" version="1"
Added:
>
>
META FILEATTACHMENT attachment="3mtm-ribbon-cable-socket-451-series-family.jpg" attr="" comment="" date="1588450876" name="3mtm-ribbon-cable-socket-451-series-family.jpg" path="3mtm-ribbon-cable-socket-451-series-family.jpg" size="10901" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="45106-000030.JPG" attr="" comment="" date="1588451236" name="45106-000030.JPG" path="45106-000030.JPG" size="8846" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="45106-000030.jpg" attr="" comment="" date="1588451852" name="45106-000030.jpg" path="45106-000030.jpg" size="31573" user="PeterSchmid" version="2"

Revision 82019-04-17 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 83 to 83
 

DCC Decoder

Added:
>
>
ToDo

ToDo

  • Dogbone, cups, 2 Stk ID 1.5 x 2 mm, Achse kürzen
  • Front light, small LED
  • Chassis 1 mm Loch ausbohren, 1 mm Schraube
  • Piston verlängern
  • Tender-Loco Coupler
 

Revision 72019-01-05 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 27 to 27
 
Contents
Changed:
<
<
Chassis / Frame
>
>
Chassis / Frame
 

Chassis / Frame

The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit.
Added:
>
>

BOM

  • Pin Socket 2.54 mm (1/10") 3x2
  • White LED
  • Red LED
  • Yellow LED
  • Resistor 1 k, 3 pcs

Wiring

Color NMRA JST Pin# Loco Header Pin# Function
Red 8 1 Right Rail Pickup
Orange 7 2 Motor(+)
Gray 3 3 Motor (-)
White 5 4 Headlight
Green 9 5 FX3 (Ashpan Flicker CV 51: 23+128=151, F24)
Blue 6 6 Function Common (+12V)
 
Changed:
<
<
Tender, Sound
>
>
Tender, Sound
 

Tender, Sound

tender-speaker-holes.jpg
Enlarge
Added:
>
>

BOM

  • TSU-1100 Steam-2 (1 Amp) Tsunami2 Decoder - Steam, SoundTraxx #884006
  • 20 mm Speaker, SoundTraxx 810053
  • 20 mm Speaker Gasket Kit, SoundTraxx #810118
  • Pin Header 2.54 mm (1/10") 3x2

Wiring

E6-connector.jpg
Enlarge

Color NMRA JST Pin# Function
Black 2 Left Rail Pickup
Yellow 4 [Backup Light]
Blue 6 [Function Common (+12V)]
Purple - Speaker (+)
Purple - Speaker (-)
Blue - Current Keeper [Function Common (+12V)?]
Black - Current Keeper [Ground?]
 
Superstructure

Superstructure

Revision 62019-01-05 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 27 to 27
 
Contents
Changed:
<
<
>
>
Chassis / Frame
 

Chassis / Frame

The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit.
Changed:
<
<
>
>
Tender, Sound
 

Tender, Sound

Added:
>
>
tender-speaker-holes.jpg
Enlarge
 
Changed:
<
<
>
>
Superstructure
 

Superstructure

Changed:
<
<
>
>
DCC Decoder
 

DCC Decoder

Line: 53 to 54
 
META FILEATTACHMENT attachment="sango-srrl-18-1.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-1.jpg" path="sango-srrl-18-1.jpg" size="3828122" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="sango-srrl-18-2.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-2.jpg" path="sango-srrl-18-2.jpg" size="3659528" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="srrl-18.jpeg" attr="" comment="" date="1545938563" name="srrl-18.jpeg" path="srrl-18.jpeg" size="38371" user="PeterSchmid" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tender-speaker-holes.jpg" attr="" comment="" date="1546712779" name="tender-speaker-holes.jpg" path="tender-speaker-holes.jpg" size="211816" user="PeterSchmid" version="1"

Revision 52018-12-30 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 29 to 29
 

Chassis / Frame

Added:
>
>		The new kit includes a coreless DC motor from Namiki, Japan, I suppose type CMS10-1346 (data sheet)! The 1:24 reduction gear seems to be the same as the one used in the SangoDachshund kit.
 

Tender, Sound

Revision 42018-12-27 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 20 to 20
 Built by Baldwin Locomotive Works in 1893 for Sandy River Railroad (No. 2) as a 2-6-0. Rebuilt in 1916 as 2-6-2. New tender built by Baldwin Locomotive Works in 1926. Scrapped 1936.

Maine Two Foot Gauge 2-6-2 Prairie Locomotives by Peter S. Barney

Added:
>
>
srrl-18.jpeg
Enlarge
 
Contents
Line: 48 to 51
 
META FILEATTACHMENT attachment="sango-srrl-18-b.png" attr="" comment="" date="1545911565" name="sango-srrl-18-b.png" path="sango-srrl-18-b.png" size="114842" user="PeterSchmid" version="3"
META FILEATTACHMENT attachment="sango-srrl-18-1.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-1.jpg" path="sango-srrl-18-1.jpg" size="3828122" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="sango-srrl-18-2.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-2.jpg" path="sango-srrl-18-2.jpg" size="3659528" user="PeterSchmid" version="1"
Added:
>
>
META FILEATTACHMENT attachment="srrl-18.jpeg" attr="" comment="" date="1545938563" name="srrl-18.jpeg" path="srrl-18.jpeg" size="38371" user="PeterSchmid" version="1"

Revision 32018-12-27 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 7 to 7
  text="Hallo" titlestyle="color:#F00000;" }%
Changed:
<
<
H0n30 Projects
>
>
Sango
HOn30 brass locomotive kit re-released by Toma at the end of 2015 (first release in 1982).
sango-srrl-18-1.jpg
Enlarge
sango-srrl-18-2.jpg
Enlarge
 
Changed:
<
<
Prototypes
>
>
Prototype
Sandy River and Rangeley Lakes Railroad S. R. & R. L. #18
 
Changed:
<
<
Varia
>
>		Wikipedia: Built by Baldwin Locomotive Works in 1893 for Sandy River Railroad (No. 2) as a 2-6-0. Rebuilt in 1916 as 2-6-2. New tender built by Baldwin Locomotive Works in 1926. Scrapped 1936.
 
Added:
>
>		Maine Two Foot Gauge 2-6-2 Prairie Locomotives by Peter S. Barney
Contents
 
Changed:
<
<
>
>

Chassis / Frame

Tender, Sound

Superstructure

 
Added:
>
>

DCC Decoder

 

Line: 31 to 46
 -- Peter Schmid - 2018-12-25

META FILEATTACHMENT attachment="sango-srrl-18-b.png" attr="" comment="" date="1545911565" name="sango-srrl-18-b.png" path="sango-srrl-18-b.png" size="114842" user="PeterSchmid" version="3"
Added:
>
>
META FILEATTACHMENT attachment="sango-srrl-18-1.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-1.jpg" path="sango-srrl-18-1.jpg" size="3828122" user="PeterSchmid" version="1"
META FILEATTACHMENT attachment="sango-srrl-18-2.jpg" attr="" comment="" date="1545918924" name="sango-srrl-18-2.jpg" path="sango-srrl-18-2.jpg" size="3659528" user="PeterSchmid" version="1"

Revision 22018-12-27 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Changed:
<
<		 image="/twiki/pub/MRR/TomaBaldwin/Toma_Model_Works_Balwin_0-4-0_4-header.jpg" title="Sango (Toma) S. R. & R. L. #18 2-6-2 Baldwin"
>
>		 image="/twiki/pub/MRR/SangoSRRL18/sango-srrl-18-b.png" title="Sango (Toma) SR&RL #18

2-6-2 Baldwin" text="Hallo"
  titlestyle="color:#F00000;" }%
H0n30 Projects
Line: 23 to 24
 
Changed:
<
<
>
>
  Creative Commons License
This work by Peter Schmid is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

-- Peter Schmid - 2018-12-25

Added:
>
>
META FILEATTACHMENT attachment="sango-srrl-18-b.png" attr="" comment="" date="1545911565" name="sango-srrl-18-b.png" path="sango-srrl-18-b.png" size="114842" user="PeterSchmid" version="3"

Revision 12018-12-25 - PeterSchmid

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="WebHome"
Sango (Toma) S. R. & R. L. #18 2-6-2 Baldwin
H0n30 Projects

Prototypes

Varia

Creative Commons License
This work by Peter Schmid is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

-- Peter Schmid - 2018-12-25

View topic | History: r20 < r19 < r18 < r17 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback